35khz Ultrasonic Cutter Generator For Rubber / Plastic Cutting

Characteristics of ultrasonic cutting machine generator

High stability: when the ultrasonic generator works, it produces 40KHz electromagnetic vibration, which is transformed into mechanical vibration and transmitted to the cutting knife and cutting materials. The mechanical cutting is carried out, so there is no need for sharp edges, the blade wear is small, and the cutter head can be replaced by itself.

No pollution: when cutting with ultrasonic knife, the temperature of the knife head is lower than 50 ℃, which will not produce smoke and odor, eliminating the risk of injury and fire during cutting.

Neat cutting: due to the ultrasonic cutting through high-frequency vibration, the material will not adhere to the blade surface, and only a small pressure is required during cutting. The fragile and soft materials will not be deformed and worn. The fabric cutting will automatically seal the edge at the same time, which will not cause edge collapse.

Simple operation: the cutting knife is connected to the ultrasonic generator, the generator is connected to 220V mains power, and the switch can be turned on for cutting. It supports hand-held cutting and is equipped with air-cooled interface.

Wide range of applications: all kinds of textile materials and plastic sheets can be cut by ultrasonic, such as natural fibers, synthetic fibers, non-woven fabrics and knitted fabrics.

35khz Ultrasonic Cutter Generator For Rubber/Plastic Cutting_Ultrasonic Welder_Pulisonic Ultrasonic

Last：35k Ultrasonic Generator For Handheld Plastic Cutting Machine
Next：35khz Ultrasonic Cutting Knife Generator For Food Cutting