Sweep Frequency Ultrasonic Generator For Mechanical Hardware Parts Cleaning

Sweep frequency ultrasonic generator has a feedback link, which mainly provides feedback signals in the following two aspects.

Sweep frequency ultrasonic generator The output power of the ultrasonic cleaning generator, when the access voltage of the ultrasonic cleaning generator changes, the output power of the generator also changes with it. It will make the mechanical vibration of the ultrasonic transducer unstable, resulting in poor working effect. Therefore, it is necessary to stabilize the output power, and adjust the power amplifier accordingly through the power feedback signal to make the power amplification stable.

For the frequency tracking of the ultrasonic cleaning generator, when the transducer works at the resonant frequency point, the efficiency is the highest and the work is the most stable.

The resonant frequency point of the ultrasonic cleaning transducer will change due to assembly and work aging. If the changed frequency is only a drift and the change is not large, the frequency tracking signal can control the signal generator, so that the frequency of the signal generator can track the resonant frequency point of the transducer within a certain range, so that the generator can work in the best state.

Sweep Frequency Ultrasonic Generator For Mechanical Hardware Parts Cleaning_Ultrasonic Generator_Pulisonic Ultrasonic

Last：40k Digital Ultrasonic Cleaner Generator For Pulse Wave Cleaning
Next：28/40k Dual Frequency Digital Ultrasonic Generator For Industrial Cleaning